ZC.MuNiu provides a comprehensive basic software platform solution for the development of automotive electronic control units. This product refers to international standards such as AUTOSAR and OSEK, and has configuration tool based on the AUTOSAR ARTOP Architecture.  ZC.MuNiu supports communication, diagnostics, and network management specifications for major OEMs like SAIC, FAW, Geely, GAC, CCAG, and GWM. ZC.MuNiu mainly includes: operating system, communication protocol stack (CAN/LIN), diagnostic protocol stack (UDS/J1939), network management (OSEK/AUTOSAR), calibration protocol stack (XCP/CCP), storage protocol stack, complex driver modules, etc. ZC.MuNiu also provide bootloader update program and configuration tool, which can be configured and redeveloped according to customer requirements. While providing basic software products, ZC also offers development services for the implementation of controller basic software functions.

The safety level of FLAGCHIP FC7300 is ASIL D, with 3 * Arm Cortex-M7 core, up to 300MHz.  FC7300 supports Arm Cortex-M7 kernel operating system. ZC can provide basic software products that comply with ASPICE Level3 processes and functional safety ASIL D requirements based on the FLAGCHIP FC7300.

ZC.MuNiu Basic Software Platform can be applied to the development of automotive electronic control unit products using the FLAGCHIP FC7300 series of chips. For example:

Ø  Automotive Domain Controller

Ø  Automotive Driver Assistance Systems (ADAS)

Ø  Integrated electro-hydraulic linear brake (One-Box)

Ø  Gateway

Ø  Battery Management System (BMS)

Ø  Car Sunroof Controller

Ø  Motor Controller

The AUTOSAR organization was established in 2003, mainly by European car manufacturers, component suppliers, and other electronics, semiconductor, and software system companies. It is committed to developing an open, standardized software architecture for the automotive industry. The goal is to "cooperate on standards and compete on applications", so can improve the stability of the basic platform, reducing costs, and enhancing the quality and speed of controller product development. The 2.1 version of the specification was released at the end of 2006, and the 3.1 version was released in 2008. Functional safety, Ethernet, and other contents are also added. Currently, the widely used versions are 4.2.1 and 4.2.2, as well as version 4.3.1.

In the major trends of electrification, connectivity, and intelligence, the number of automotive electronic and electrical components is increasing. The electrical structure is becoming more complex, and the development cycle of the vehicle is continuously shortening. Basic software plays an increasingly important role.

ZC has the core technology of the AUTOSAR basic software. Can provide on-site support with high quality, fast speed, and low cost.

Ø  Compliant with AUTOSAR 4.3.1

Ø  ARTOP configuration tool, compatible up to AUTOSAR 4.4.0

Ø  Operating System

Ø  Communication Protocol Stack（CAN\LIN）

Ø  Diagnostic Protocol Stack (UDS\J1939)

Ø  Network Management (OSEK\AUTOSAR）

Ø  Calibration Protocol Stack（XCP\CCP）

Ø  Storage Protocol Stack

Ø  Custom Development of Complex Drivers

Ø  Engineering Services

MCU Architecture                                             

The main chip information is as follows:

Ø  3 Cortex-M7 (2 lockstep), 300MHz,

Ø  8MB P-Flash + 256K D-Flash, 1088KB RAM,

Ø  10 CAN-FD,

Ø  1 Gbit Ethernet with TSN

ASIL-D, AEC-Q100 Grade 1

Software Architecture

ZC.MUNIU basic software platform ARCHITECTURE

MUNIU CONFIGURATION TOOL MAIN INTERFACE

MUNIU CONFIGURATION TOOL GENERATES CONFIGURATION CODE

To meet the requirements of customer and enhance the extensibility of the basic software platform, ZC.MuNiu has implemented configurable modules and configuration tool. Customers can use the configuration tool to configthe modules according to their specific needs, generate configuration code files, and integrate these files into projects.

ZC.MUNIU CONFIGURATION TOOL ARCHITECTURE

ZC.MuNiu basic software platform configuration tool is based on the Eclipse platform and is built on the ARTOP architecture, which implements the parsing of the AUTOSAR model and ARXML. In addition to the modules defined by the AUTOSAR standard, it also supports OEM and Tie1 manufacturers to develop their own modules for secondary development. After the configuration is completed, the configuration code for each module can be generated.

MUNIU SOFTWARE COPYRIGHT REGISTRATION CERTIFICATE

Click to download the product manual